![manual swap magic 3.6 manual swap magic 3.6](http://i.ytimg.com/vi/STdAYZSzo8g/maxresdefault.jpg)
Note: it is important to key in the exactly same phrase with space after tabcal.exe, and make sure that the ‘N’ and the ‘V’ are capitalized, and that there is no space between ‘No’ and ‘Validate”.ġ. In the field “Type the location of the item”, key in the following phrase: %windir%\system32\tabcal.exe NoValidate, then click next. Right click the desktop, select “New>Shortcut”.ġ. If you use ProE controller, plug in the controller before the computer is turned on.ġ. The screen should respond to your touch, but the position may not be accurate. Plug in the USB controller, Windows will find new hardware. If you have already installed it, you must uninstall it first. Vista : If you prefer to use Vista’s embedded tablet driver, DO NOT install Magic Touch driver from the CD. For Windows : (Must logon with administrator’s password for Vista /XP/2000)ġ. Linux user : please see readme file in Linux folder for setup instructions.ġ. Mac driver CD is included only if you have ordered Mac version (USB-M or USB-WM). Windows 2000 and XP Multi Monitor setup and examples are under the folder MultiMonitor 2K-XP.
#MANUAL SWAP MAGIC 3.6 FOR FREE#
If there is a previous Magic Touch driver or other touch screen ’s driver installed in your system, uninstall them first.Īll Windows and Linux drivers are included on one CD, or they can be downloaded for free (except Mac version). Plug the touch screen cable into the controller box.ġ. The ProE-X (or ProE) controller should be plugged into the serial port (com1 or 2) when the computer is powered off.įor add-on models KTMT-1214, 1500, 154W, 1700W, 1900W, 2200W and 2400W, and all the built-in touch screen models, connect the extension cable between touch screen and controller with white dots aligned.Ĭonnect the controller to computer. The USB-XD & USB-5 (or USB-X, USB) controller should be plugged into the USB port as instructed by the following driver installation steps.